DOORS REV.1, EMERGENCY EGRESS,
JEFFERSON
* SUPPLY APPROXIMATELY
** INCLUDED IN THE PROJECT **
*
(2 KIT)
F-D001 FRAME, 12GA SS316 #4, DBL RABB,
LHRA, 5′ 0″ X 7′ 2″ X 11″ JD, 6″ FACE ON
RH JAMB, 2-1/2″ FACE ON LH JAMB, 2″ HEAD
FULLY WELDED GROUND & POLISHED,
CONCEALED EWAS WITHOUT BOLTS, 90 MIN
WH
LABEL, (2)SURFACE MTD CLOSER
REINFORCEMENT; PREP FOR: (2)CONTINUOUS
HINGE (REINFORCE ONLY), (2)SVR EXIT
*(2 PAIR KIT)
D-D001 DOOR PAIR, SEAMLESS, 14GA SS316
#4, LHRA?, 5′ 0″ X 7′ 2″ X 1-3/4″,
FLUSH, BEVELED, STEEL STIFFENED, 90 MIN
WH LABEL, FLAT OVERLAPPING ASTRAGAL,
(2)SURFACE MTD CLOSER REINFORCEMENT,
(2)SEAMLESS TOP (SMOOTH), WEEP HOLES;
PREP FOR: (2)CONTINUOUS HINGE
(REINFORCE ONLY), (2)RIM W/SVR EXIT +
TRIM
*
(1 KIT)
F-D003 & F-D004 FRAME, 12GA SS316 #4,
DBL RABB, (2)RHR, (1)3′ 0″ AND
(1)3′ 8″ X 6′ 11-1/2″ X 12″ JD, 2″ FACE,
2″ HEAD AND 5-1/4″ CENTER MULLION, FULLY
WELDED GROUND & POLISHED, PIERCE &
DIMPLE EWAS WITHOUT BOLTS, (2)90 MIN WH
LABEL, (2)SURFACE MTD CLOSER
REINFORCEMENT; PREP FOR: (2)CONTINUOUS
HINGE (REINFORCE ONLY), (2)RIM EXIT
*
(1 KIT)
D-D003 DOOR, SEAMLESS, 14GA SS316 #4,
RHR, 3′ 0″ X 6′ 11-1/2″ X 1-3/4″, FLUSH,
BEVELED, STEEL STIFFENED, 90 MIN WH
LABEL, SURFACE MTD CLOSER
REINFORCEMENT,
SEAMLESS TOP (SMOOTH), WEEP HOLES;
PREP
FOR: (1)CONTINUOUS HINGE
(REINFORCE ONLY), RIM EXIT W/TRIM
*
(1 KIT)
DOOR, SEAMLESS, 14GA SS316 #4, RHR,
3′ 8″ X 6′ 11-1/2″ X 1-3/4″, FLUSH,
BEVELED, STEEL STIFFENED, 90 MIN WH
LABEL, SURFACE MTD CLOSER
REINFORCEMENT,
SEAMLESS TOP (SMOOTH), WEEP HOLES;
PREP
FOR: (1)CONTINUOUS HINGE
(REINFORCE ONLY), RIM EXIT W/TRIM
*
ALL THE HARDWARE & PARTS MATERIAL MUST
BE INCLUDED WITH DOOR KITS TO COMPLETE
THE INSTALLATION OF THIS PROJECT.
*VENDOR MUST SUBMIT SHOP DRAWING,
SAMPLES
, CUT SHEETS AND “OR EQUAL”.
*
A SITE VISIT IS REQUIRED TO OBTAIN
FIELD MEASUREMENTS AND FIELD
VERIFICATION PRIOR TO BIDDING ON
THIS PROJECT.
*
Must register on Septa ePS System to bid, at

Procurement