This is a supply contract for a utility work machine to help maintain the roads and ground at Blue Marsh Lake. The Contractor shall furnish a utility work machine per specifications of the salient characteristics and features listed in Section 3.0 under Performance Requirements. This equipment procurement is a direct replacement for a Utility Vehicle that is reaching the end of its expected useful life.

The Contractor shall provide a utility work machine per specifications of salient characteristics listed below. They should include but are not limited to the following features:

- Diesel Engine, Turbocharged

- Minimum Horsepower, 60

- Liquid Cooled Engine

- Turf Tires

- Enclosed Cab with HVAC

- Cruise Control

- Dual Port USB Charger

- Full-Time Four-Wheel Drive

- Standard Bucket Attachment

- Boom Float

- Road Package: Backup Alarm, Turn Signal, Flashers, Taillights, Brake Lights, Rear and Side Mirrors, Horn, Rear Work Lights, Seat Belts, Shoulder Harness, and Headlights

- Power Steering with Tilt

- Automatic Parking Brake

- Instrumentation Display

- Joystick, Manually Controlled with Lift Arm Float

- Rear Receiver Hitch

- Front LED Working Lights

- 4-Wheel Independent Suspension

- Roll Over Protective System (ROPS)

- Minimum Travel Speed, 16 mph

- Minimum Payload, 2000 lb

- Minimum Towing Capacity, 4000 lb

- Minimum Fuel Capacity, 20 gal

- Minimum Ground Clearance, 8 in

- Hydraulic Cargo Dump Box

- Minimum Cargo Box Size (Length/Width/Height), 56 in x 51in x 10 in

- Hydraulic System, Auxiliary High Flow, 27.9 gal/min

- Hydraulic System Auxiliary Pressure, 3,000 psi

- Heavy Duty Battery

- Quick Attachment Mounting System (multiple use attachments)

- Attachment Controls Compatibility (allows use of existing Government owned snowblower and auger attachments with the new machine)

- Radio

- Traction Control

- Engine Block Heater

- Fire Extinguisher Kit

- Minimum 72 in Flail Cutter Attachment