Hydro Demolition Equipment Rental
Agency: | DEPT OF DEFENSE |
---|---|
Level of Government: | Federal |
Category: |
|
Opps ID: | NBD00159669538733014 |
Posted Date: | Jul 12, 2023 |
Due Date: | Jul 26, 2023 |
Solicitation No: | W911WN23Q0011 |
Source: | https://sam.gov/opp/2d0d5581aa... |
Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.
- Contract Opportunity Type: Combined Synopsis/Solicitation (Original)
- All Dates/Times are: (UTC-04:00) EASTERN STANDARD TIME, NEW YORK, USA
- Original Published Date: Jul 12, 2023 09:01 am EDT
- Original Date Offers Due: Jul 26, 2023 11:00 am EDT
- Inactive Policy: Manual
- Original Inactive Date: Oct 31, 2023
-
Initiative:
- None
- Original Set Aside:
- Product Service Code: 4320 - POWER AND HAND PUMPS
-
NAICS Code:
- 333996 - Fluid Power Pump and Motor Manufacturing
-
Place of Performance:
Monaca , PA 15061USA
USACE Pittsburgh District seeks to rent hydro demolition equipment and supporting machinery to facilitate repairs of no less than 20 monolithic joints within the Main Chamber of the Montgomery Lock. Hydro demolition is required to remove vertical concrete at a maximum depth of 1’, a minimum width of 3’ and a maximum width of 7’per pass. Existing concrete is reinforced with a layer of welded wire mesh roughly 3” beneath the surface and doweled in with #6 hooks.
High Pressure Water Blasting System Specifications
• Fuel Type: Diesel
• Minimum Horsepower: 600 HP
• Minimum Rated Gallons/Minute: 43 GPM
• Minimum Rated PSI: 20,000 PSI
• Minimum Rated BAR: 1,400
• Weight: NTE 20,000 lbs
• Length: NTE 18’
• Width: NTE 8’
• Height: NTE 8’
• Intake Hose: High Pressure 75’-150’
• Discharge Hose: High Pressure 75’-150’
• Must Have Crane Lifting Points.
• Must be setup to take water supply from river.
Hydro Demolition Robot Specifications
• Minimum Cutting Height Overhead: 12’
• Minimum Cutting Height – Vertical: 15’
• Minimum Cutting Reach – Vertical: 10’
• Minimum Cutting Reach – Horizontal: 12’
• Minimum Cutting Below Track Level: 6’
• Cutting Width: 3’-7’
• Weight: NTE 7,000 lbs
• Length: NTE 14’
• Width: NTE 6’
• Height: NTE 8’
• Must Have Crane Lifting Points.
Training Support
At least 8 hours of onsite training support for the use of the proposed equipment and emergency technical support for machine failure.
- WILLIAM S MOORHEAD FEDERAL BUILDING 1000 LIBERTY AVE
- PITTSBURGH , PA 15222-4198
- USA
- Mary Doherty
- mary.k.doherty@usace.army.mil
- Phone Number 4129357597
- Jul 12, 2023 09:01 am EDTCombined Synopsis/Solicitation (Original)
TRY FOR FREE
Not a USAOPPS Member Yet?
Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.