Active

Contract Opportunity

This is a SOURCES SOUGHT NOTICE and is for “information purposes only” to prepare a one-time buy for NSN 4240-01-294-7960, PR number 7005429483. This is NOT a request for proposals, quotations or bids. This notice is for informational and planning purposes only and shall not be construed as a solicitation or an obligation or commitment by the Government. This notice is intended strictly for market research pursuant to FAR Part 10. The purpose of this notice is to obtain information regarding the availability and capability of qualified businesses that are capable of executing the potential contract. The government is not obligated and will not pay for any information received from potential sources as a result of this notice. Your response to the information requested will assist the Government in determining the appropriate acquisition method. No solicitation exists at this time.

The Government intends to purchase approximately 20 EA (DDSP NEW CUMBERLAND FACILITY

, NEW CUMBERLAND PA 17070-5002 US) of NSN 4240-01-294-7960, Slide, Escape, Aircraft. It is to be manufactured by approved sources only. Parties interested in becoming an approved source for this item are encouraged to complete a Source Approval Request (SAR) package.

PR 7005429483

NSN: 4240-01-294-7960

FSC: 4240 – Safety & Rescue Equipment

NAICS Code: 339113

Item Description: Slide, Escape, Aircraft ‘

AIR CRUISERS COMPANY, LLC (70167), P/N: 22D22825-117

Estimated Quantity: 20 EA

Estimated Delivery: 180 Days ADO

Stock Location: W25G1U

W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002 US

SLIDE, ESCAPE, AIRCRAFT

RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

AIR CRUISERS COMPANY INC

BELMAR, NJ

RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for

Manufacturers and Non-Manufacturers

RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES

CLAUSE 52.246-9000, CERTIFICATE OF QUALITY

COMPLIANCE, APPLIES.

WHEN THE PURCHASE ORDER TEXT (POT)

DESCRIBES THE REQUIRED PRODUCT(S) BY NAME AND

PART NUMBER OF A SPECIFIC ENTITY, BY THE NAMES

AND PART NUMBERS OF A NUMBER OF SPECIFIC

ENTITIES, OR BY THE NAME(S) AND PART NUMBER(S)

OF SPECIFIC ENTITY/ENTITIES AS MODIFIED BY

ADDITIONAL REQUIREMENTS SET FORTH IN THE POT,

ONLY THAT/THOSE PRODUCT(S) HAVE BEEN DETERMINED

TO MEET THE NEEDS OF THE GOVERNMENT AND ARE

ACCEPTABLE. SUCH PRODUCT(S) ARE "EXACT

PRODUCT(S)" AS DEFINED IN "DLAD 52.217-9002,

CONDITIONS FOR EVALUATION AND ACCEPTANCE OF

OFFERS FOR PART NUMBERED ITEMS."

A VENDOR OFFER/QUOTATION, "BID WITHOUT

EXCEPTION," IS A CERTIFICATION THAT THE "EXACT

PRODUCT," MANUFACTURED AND/OR SUPPLIED BY ONE

OF THE ENTITIES CITED IN THE POT WILL BE

FURNISHED UNDER THE CONTRACT OR ORDER. ANY

PRODUCT NOT MANUFACTURED AND/OR SUPPLIED

BY ONE OF THE ENTITIES CITED IN THE POT

IS AN "ALTERNATE PRODUCT," EVEN THOUGH IT

MIGHT BE MANUFACTURED IN ACCORDANCE WITH THE

DRAWING(S) AND/OR SPECIFICATIONS OF ONE OF THE

ENTITIES CITED IN THE POT.

IF AN ALTERNATE PRODUCT IS FURNISHED UNDER A

CONTRACT OR ORDER FOR AN EXACT PRODUCT, THE

ALTERNATE PRODUCT WILL BE AN UNAUTHORIZED

SUBSTITUTION, AND MAY YIELD CRIMINAL PENALTIES

IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO

THE GOVERNMENT.

CRITICAL ITEM - SOURCE INSPECTION REQUIRED.

ADEQUATE DATA FOR EVALUATION OF ALTERNATE

OFFERS IS NOT AVAILABLE AT THE PROCUREMENT

AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE

DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND

ALTERNATE PART FOR EVALUATION.

QUALITY ASSURANCE DATA

DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION

TESTING,IS HEREBY INCORPORATED,AND MAY BE

INVOKED AT THE DISCRETION OF THE PROCUREMENT

ACTIVITY.

ASQ H1331 Table 1 Shall be used, and will take precedence over Sample

Size Coding methods and Sampling Plan tables as outlined in military and

federal specifications, standards, Commercial Item Descriptions (CIDs)

prepared by DoD activities, and those sampling plans cited by military

service and DLA Troop Support - Quality Assurance Provisions (QAPs).

Those documents that identify the classification of characteristics as

critical, major, and minor, shall have corresponding associated AQL

Index values of 0.10,1.0, and 4.0 respectively. ASQ H1331 takes

precedence over non-government standard ASQ Z1.4.

Those specifications, standards, CIDs, drawings and QAPs using sampling

plans based on zero acceptance are excluded from these requirements, as

are those not specifying characteristics as "critical", "major", and/or

"minor".

Quality conformance inspection requirements shall be in accordance with

clause 52.246-9064.

THIS IS AN AIR FORCE DESIGNATED CRITICAL SAFETY

ITEM (CSI).

.

SOURCE INSPECTION REQUIRED

.

ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE

FORWARDED TO THE DSC CONTRACTING OFFICER

FOR REVIEW AND APPROVAL.

.

ALL ITEMS OF SUPPLY SHALL BE MARKED IAW

MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL

BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),

CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S

CAGE CODE AND PART NUMBER.

THIS IS AN AIR FORCE DESIGNATED CRITICAL SAFETY

ITEM (CSI).

.

ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE

FORWARDED TO THE DSC CONTRACTING OFFICER

FOR REVIEW AND APPROVAL.

.

ALL ITEMS OF SUPPLY SHALL BE MARKED IAW

MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL

BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),

CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S

CAGE CODE AND PART NUMBER.

CRITICAL APPLICATION ITEM

AIR CRUISERS COMPANY, LLC 70167 P/N 22D22825-117

IAW REFERENCE QAP 14153 SQAP-PLT3

REVISION NR DTD 06/15/2022

PART PIECE NUMBER:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:10 OPI:O

INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

CONTRACTOR SHALL PROVIDE PACKAGING,

BLOCKING/BRACING ENSURING EACH ITEM IS

PROVIDED PHYSICAL/MECHANICAL PROTECTION

DURING TRANSPORT AND STORAGE.

Attachments/Links